Double Girder EOT CraneEOT CraneIndustrial Machine And Equipments

Top 10 Double Girder EOT Crane Manufacturers in India

Eye4Future

August 25, 2026

6 Min Read

2 Views

0 Comments

Overview: A double-girder EOT crane runs on two parallel bridge girders instead of one, and that extra beam is why it lifts heavier, spans farther, and holds its alignment year after year, usually 10 to 300+ tons. India’s cranes and lifting segment is already the biggest piece of the material handling market and still growing. Below: what separates this crane from a single girder unit, ten manufacturers worth shortlisting, and the buying mistakes that cost companies the most.

Introduction

A double-girder EOT crane is exactly what it sounds like: an overhead lifting machine built with two parallel girders, riding on end trucks along elevated rails, with the trolley and hoist placed on top of both beams rather than hanging below a single one. That’s the whole trick behind why it lifts more and lasts longer.

You’ll spot these cranes in steel plants, shipyards, cement units, and heavy engineering workshops, doing lifting that never really stops. Standard models handle 5 to 100 tons, custom builds go past 300, and spans typically run 20 to 60 meters, enough for large sheds where a lighter crane would sag under continuous strain.

The second girder distributes the weight, so the crane keeps its alignment through repetitive, heavy-duty cycles that wear a single girder unit down faster. Since the trolley rides on top rather than underneath, plants also get more usable hook height without extra roof clearance, often the deciding factor in older buildings with fixed headroom. It is important to understand the crane type, why Indian manufacturers keep investing in it, and which suppliers are worth your time.

What Is a Double Girder EOT Crane?

A double-girder EOT crane is just two parallel girders, end trucks on either side, and a trolley-hoist assembly riding on top of both beams. A single-girder crane has the hoist hanging below one central beam, and that difference changes quite a lot.

Here’s what moving to two girders gets you:

• Higher hook height. Trolley on top instead of underneath means more usable lift for the same building headroom, an advantage where roof clearance is tight.
• Greater load capacity. 5 to 100 tons standard, well past 300 tons for custom builds serving steel plants and shipyards.
• Longer spans. Usually 20 to 60 meters, which matters in wide sheds where a single girder crane would sag or drift under load.
• Better stability under uneven loads. Two girders share stress more evenly, cutting the risk of misalignment during long, heavy cycles.

Single girder cranes aren’t obsolete; they’re still faster to install and cheaper for lighter, occasional work. Double girder EOT cranes cost more, but they’re worth it once tonnage, span, or duty cycle go beyond what one beam can safely handle.

Why Are Indian Industries Investing More in These Cranes?

India’s cranes and lifting segment is already the largest chunk of the material handling equipment market, with most estimates putting growth at roughly 7–8% a year through the early 2030s. A few things are driving that demand specifically toward double girder cranes:

• Steel and metals production keeps expanding, and steel handling is one of the heaviest, most repetitive lifting work around.
• Government infrastructure spending, industrial corridors, and manufacturing incentives are fueling new plant construction that needs lifting capability from day one.
• Shipbuilding and port operations demand double-girder EOT cranes that move loads across wide spans without losing precision.
• Automotive and heavy engineering units are automating production lines, and cranes with variable frequency drives and radio remotes fit right into that shift.

If your facility does any heavy or repetitive lifting, pick a manufacturer who’ll still answer the phone in year seven.

Top 10 Double Girder EOT Crane Manufacturers in India

1. Ganesh Engineering Co.

Ganesh Engineering Co. built its name the slow way, making double-girder EOT cranes that hold up under daily use instead of needing constant monitoring. Capacity, span, and controls get worked out with the client before fabrication starts, and every crane runs through a trial before leaving the factory.
For more information contact: 
Website: https://www.ganeshcrane.com/ 
Phone Number: +91982-408-9366
Email: sales.ganeshcrane@gmail.com 

2. Anupam Industries Ltd.

Anupam Industries Ltd is one of the largest, most established double-girder EOT crane makers in the country, with decades of supplying steel plants, power projects, and nuclear facilities, including institutional orders from SAIL and BHEL.
For more information contact: 
Website: https://www.anupamgroup.com/ 
Phone Number: +91 9312076548 
Email: purchase@anupamgroup.com 

3. ElectroMech

High-speed performance paired with unusually high hook heights, a combination that makes ElectroMech well-suited for steel and metal-handling environments. Capacity runs from a few tons to several hundred, with standard or fully customized options.
For more information contact: 
Website: https://www.emech.com/in/ 
Phone Number: +91 8527055033
Email: cranes@emech.in  

4. Amsak Cranes Pvt. Ltd.

Around since the late 1970s, Amsak Cranes Pvt. Ltd. has built its double-girder EOT crane line for steel, power, and cement plants, with capacities up to 300 tons and spans reaching 60 meters. 
For more information contact: 
Website: https://amsakcranes.com/ 
Phone Number: +91-9003038355
Email: sales@amsakcranes.com   

5. Vertex Cranes

Less catalog, more customization, Vertex Cranes works through layout details with clients before finalizing specs, which suits buyers dealing with awkward spans or tight headroom.
For more information contact: 
Website: https://www.vertexcranes.com/ 
Phone Number: +91-9390181010 
Email: vertexcranes@gmail.com      

6. Krishna Crane Engineers

Ahmedabad-based, Krishna Crane Engineers builds strictly to IS-807 and IS-3177 duty classification standards, a discipline that matters when safety audits or insurance documentation come into play.
For more information contact:
Website: https://www.krishnacranes.com/ 
Phone Number: +91 99786 30895   
Email: sales@krishnacranes.com 

7. Herc Material Handling LLP

Covers the entire IS duty class range, M1 through M8, with features like auxiliary hoists and tandem operation; Herc Material Handling LLP offers this double-girder EOT crane for lifting needs that vary across production lines.
For more information contact:
Website: https://hercindia.com/   
Phone Number: +918879489070 
Email: info@hercindia.com 

8. Brady Morris

Also based in Ahmedabad, Brady Morris fabricates cranes from rolled steel sections welded into reinforced box structures, with capacities up to 70 tons, making them a solid pick for mid-sized operations.
For more information contact:
Website: https://bradymorris.in/  
Phone Number: +91 22 22048361-65
Email: info@bradys.in 

9. Dhiraj Cranes

Dhiraj Cranes has built its reputation on after-sales support as much as the hardware, offering installation guidance, technical help, and even export-order assistance. That ongoing relationship often matters more than the initial sale.
For more information contact:
Website: https://dhirajcranes.in/  
Phone Number: +91-9818211880 
Email: info@dhirajcranes.in 

10. Ambica Engineering

Ambica Engineering uses a bolted design that trims dead weight without sacrificing strength. Duty classifications range from light repair-shop use (M3) to extra-heavy hot-metal handling (M8) under one roof.
For more information contact:
Website: https://www.ambicacranes.com/    
Phone Number: +91 98250 23941 
Email: hoist@ambicacranes.com 

How to Choose the Right Manufacturer

Every name on this list can technically build a double-girder EOT crane. The question is which one builds the right crane for your operation. Weigh these before you sign anything:

• Duty class match. An M8-rated crane for a foundry and an M3 crane for occasional workshop use are different animals; buying above or below your actual duty cycle wastes money either way.
• After-sales service reach. A crane breaking down three states from the nearest service center is a risk. Ask how fast a technician can get on-site.
• Compliance documentation. Confirm the crane meets IS-3177 and IS-807 standards, in writing, before installation.
• Track record with similar loads. A supplier great with steel coils isn’t automatically right for a shipyard. Ask for references in your industry.

Mistakes Buyers Commonly Make

• Choosing on price alone, without checking duty class suitability, a fast route to premature wear and downtime.
• Skipping the site survey. Headroom, runway alignment, and power supply shape crane design; assuming standard specs will fit costs more than expected.
• Underestimating maintenance costs. A cheaper crane with hard-to-source spares can cost more over five years than one backed by local support.
• Ignoring operator training. Even a well-built crane turns risky without proper training on controls and load limits.

Conclusion

Choosing a double girder EOT crane manufacturer comes down to trust: does this company understand your load, your span, your plant’s daily grind, or are they just selling steel? Ganesh Engineering Co. has built its reputation on getting those details right before the first weld happens, which is why plants keep coming back for their next crane too. A good crane fades into the background of daily operations, lifting reliably without drama. That’s the standard worth holding every manufacturer to.

FAQs

What load capacity can a double girder EOT crane handle? 
Most standard models handle 5 to 100 tons, with custom builds going well beyond 300 tons for steel plants and shipyards.

How is it different from a single girder crane? 
It uses two parallel girders with the trolley on top, giving it a higher hook lift and greater capacity than a single-girder crane, where the hoist hangs below one beam.

Which Indian standards apply? 
Reputable manufacturers build to IS-3177 and IS-807, covering duty classification and structural design.

How long does installation take? 
Usually a few weeks from delivery to commissioning, once the runway and power infrastructure are ready.

Can these cranes be customized? 
Yes, span, hook height, control type, and attachments like grabs or magnets can all be tailored to the work.